features / benefits hazardous location the dialight visual signal light is an led based class 1, division 2 certified fixture. used for visual indication in hazardous environments, providing a valuable solution to the petrochemical industry facilities. application operating conditions temperatures ranging from -67 o f to +131 o f (-55 o c to +55 o c). will withstand wind in excess of 150 mph (240 kph), salt fog. materials / finish cast aluminum housing and stainless steel hardware. electro-statically applied powdercoat of aviation orange paint. etl listed in compliance with ul1598 and ul844 for use in class 1, div 2 hazardous locations us patent# 6,425,678 atex certified, equipment group ii (surface industries), category 3 (zone 2), t4 rated suitable for all class 1, div 2, groups a, b, c, d hazardous environments, t4 rated inherent safety capability; low electrical/thermal energy and high light output unique optically designed lens to enhance led operation and provide 360 o visibility weather/corrosion resistant lamp assembly and housing self-contained wiring compartment eliminates additional boxes can be operated steady or flashed (controller not supplied) available as a single or dual unit resistant to shock and vibration threaded 1 and 3/4 bottom hub for mounting lasts years longer than an incandescent 5 year warranty ip 65 / ip 66 / nema 4x rated mdtf860atex004_a dialight europe ltd. exning road, newmarket, england, cb8 0ax tel: +44 (0) 1638 666541 ? fax: +44 (0) 1638 561735 www.dialight-obstruction-lights.com dialight corporation 1501 route 34 south ? farmingdale, nj 07727 usa tel: (1) 732-919-3119 ? fax: (1) 732-751-5778 www.dialight.com led visual signal light electrical specifications a subsidiary of dialight plc ex na iic t4 certified to: atex, equipment group ii (surface industries), category 3 (zone 2), t4 rated va (typ) va (max operating voltage watts (typ) watts (max) 120 vac units (60 hz) 50 65 120 10 18 230 vac units (50 hz) 61 73 230 13 17
part number approx. shipping weight container dimensions weights & measurements ordering information photometric data mechanical dimensions single unit 7.14 lbs 16 x 9 x 8 dual unit 16.06 lbs 22 x 17 x 9 lens assembly hazardous location dialight europe ltd. exning road, newmarket, england, cb8 0ax tel: +44 (0) 1638 666541 ? fax: +44 (0) 1638 561735 www.dialight-obstruction-lights.com dialight corporation 1501 route 34 south ? farmingdale, nj 07727 usa tel: (1) 732-919-3119 ? fax: (1) 732-751-5778 www.dialight.com led visual indication light dual wire housing lens assembly shield 14.21 [360.8] 15.54 [394.7] 14.77 [375.2] bi-directional wire housing shield 11.77 [298.9] ref 5.79 [147] ref 11.21 [284.6] ref dimensions are in inches [mm] 860 (green) 860 (yellow & red) single units single, red 860-xr0y-001 single, green 860-xg0y-001 single, yellow (amber) 860-xy0y-001 single, blue 860-xb0y-001 single, white 860-xw0y-001 note: x indicates certification y indicates voltage (see certification / voltage chart) double units double, red 860-xr0y-002 double, green 860-xg0y-002 double, yellow (amber) 860-xy0y-002 double, blue 860-xb0y-002 double, white 860-xw0y-002 note: x indicates certification y indicates voltage (see certification / voltage chart) replacement light assemblies single, red 860-xr0y single, green 860-xg0y single, yellow (amber) 860-xy0y single, blue 860-xb0y single, white 860-xw0y note: x indicates certification y indicates voltage (see certification / voltage chart) certification / voltage chart x = 9: atex y = 1: 120 vac y = 2: 230 vac a subsidiary of dialight plc mdtf860atex004_a
|